But the drives are working just fine and a check using HP's array configuration utility shows the new firmware as rev HPDF.
Synology creates network attached storage and IP surveillance solutions that transform the way users manage data and conduct surveillance in the cloud era.
For the update you will need the Mega CLI utility for Windows or Linux.
First you have to find out which enclosure ID you have and which ID the hard drive has.
When you boot from that CD it's only supporting the "historical" IDE mode.
An update to the Play Station®4 system software was released on August 2, 2017.
Interestingly it booted back to the bios after the firmware executable loaded, and the actual update was done at the bios level.
Only took a few minutes with all sorts of dire warnings about not interrupting the power or shutting it off!
Note: Please make sure you have a backup of your data.It is possible with LSI and Adaptec to flash multiple hard drives simultaneously.We do not recommend this method as some updates were aborted during the update process.You can do this with the following command: The Phys Drv parameter requires an Enclosure ID and an ID of the hard drive you want to flash.The next parameter specifies the path to the firmware file and the last one the controller number.